P 12/ 25
Repair
[3] DISASSEMBLY/ASSEMBLY
[3]-5. Torsion spring 6 for Connector, Battery housing
ASSEMBLING
See Fig. 35.
Set Torsion spring 6 into Housing L, and then assemble Connector to Compression spring 6. Refer to A . Set Opener in place. Refer to B .
When Battery housing L and R are matched, do not fail to assemble the parts shown in C .
Fig. 35
A
C
Cushion rubber (R)
Rubber pin 5
Pin 1.5
Battery housing set
Hold one end of Torsion spring 6
with
the inner wall of Housing L.
Insert the hinge of Connector into the coil of Torsion spring 6.
Hook the opposite end 
of Torsion spring with the step of Housing L.
B | Opener |
| |
Align the chamfered side |
|
of Opener with the walls |
|
of Housing L. |
|
(Housing set)
Cushion rubber (L) Cushion (behind Terminal)
