Makita BHR243 (LXRH02*1) specifications DX01, DX02, Specification, Standard equipment

T	ECHNICAL INFORMATION								PRODUCT
		BHR242 (LXRH01*1), BHR243 (LXRH02*1)							P 1/ 25
Models No.								W
Description		Cordless Combination Hammer 24mm (15/16")
		*1 Model number for North and Central American countries.							H
CONCEPT AND MAIN APPLICATIONS
The subject models are 24mm (15/16") Cordless Combination Hammers
powered by 18V Li-ion Battery, featuring:								L
• Efficient Brushless DC motor provides higher productivity than that of
18V Cordless Combination Hammer model BHR202.							Dimensions: mm (")
• Able to drill in concrete as fast or faster than 24V Cordless Combination
								BHR242 328(12-7/8)
Hammer model BHR200.							Length (L)
								BHR243 353(13-7/8)
• 3 operation modes (rotation only/ rotation with hammering/ hammering only)
• Quick change drill chuck for models BHR243 (LXRH02*1) only							Width (W)		85 (3-3/8)
• Makita’s first Cordless Combination Hammers with Dust extraction system.							Height (H)	213 (8-3/8)
Note: • These products are not compatible with 1.3Ah battery BL1815.
DX01, DX02
These are the accessories as Makita’s first Dust extracting system exclusively									H
for model BHR242 (LXRH01*1), BHR243 (LXRH02*1).
This system is designed to collect dust effectively with on-off operation
of the tool’s on-off trigger switch interlocked with this system.
Note: • This system can be applied for concrete drilling only and comes with
	Dust case, Filter and 5 pcs. of extra Sealing caps.						W	L
	• The following parts are available optionally:
	Dust case set, Filter set, Plastic carrying case (can be stored with BHR242
	or BHR243)						Dimensions: mm (")
Dust extraction system			For Model and its Chuck system
								DX01	372(14-5/8)
	DX01	BHR242 (LXRH01*1)		Normal chuck			Length (L)
	DX02	BHR243 (LXRH02*1) Quick change chuck						DX02	397(15-5/8)
							Width (W)	88 (3-1/2)
Specification
							Height (H)	287 (11-1/4)
	Model		BHR242	BHR243
			(LXRH01*1)	(LXRH02*1)		Standard equipment
	Voltage: V			18
	Cell		Li-ion			Side grip assembly ............................ 1
Battery Capacity: Ah				3.0		Depth gauge (Stopper pole) .............. 1
	Energy capacity: W			54		Plastic carrying case ......................... 1
	Charging time: min.		22 with DC18RC (DC18RA*2)			Quick change drill chuck set
						for BHR243 (LXRH02*1) only ....... 1
		Concrete	24 (15/16)
					Note: The standard equipment for the tool
Capacity: mm (")		Steel	13 (1/2)
							shown above may vary by country.
		Wood	27 (1-1/16)
						Optional accessories
No load speed: (min-1= rpm)			0 - 950
Blows per min.: (bpm=min-1)			0 - 4,700			SDS-PLUS bits, Taper shank T.C.T bits,
Chuck capacity: mm (")			10	(3/8)		Taper shank adapter, Cotter, Center bit,
						Core bit adapter, Drill chuck assembly,
Bit shank			Adapted for SDS-PLUS
						Chuck adapter, Drill chuck S13,
Quick change drill chuck			No	Yes
						Chuck key S13, Keyless drill chuck,
			3 modes
Operation mode						Tool holder set, Dust cup 5 & 9,
			(Rotation only/ Rotation with Hammering/			Dust cup set, Bull point, Cold chisel,
			Hammering only)
						Grooving chisel, Scaling chisel,
Variable speed control
				Yes		Scraper assembly, Grease vessel 30g,
	by switch trigger
						Blow out bulb, Safety goggles,
Constant speed control				Yes
						Bit grease, Plastic carrying case,
Reverse switch				Yes
						Battery BL1830,
Clutch (Torque limiter)				Yes		Fast charger; DC18RA*2, DC18RC,
Weight of Dust			1.3 (3.0) for DX01,			Charger; DC18SC, DC24SC,
extracting system: kg (lbs)			1.4 (3.0) for DX02			Automotive charger DC18SE,
Weight according to EPTA-			3.3 (7.2)	3.4 (7.6)		Dust extraction system (DX01, DX02)
Procedure 01/2003: kg (lbs)

*2: for North and Central American countries only