Pioneer PRV-9200 Recording Recording time and picture quality, Restrictions on video recording

Page 45

Recording

Recording time and picture quality

There are four preset recording quality modes:

FINE – Highest quality setting, gives about one hour of recording time on a DVD disc.

SP (Standard Play) – Default quality, sufficient for most applications, gives about two hours of recording time on a DVD.

LP (Long Play) – Slightly lower video quality, but doubles the recording time on a DVD to around four hours.

EP (Extended Play) – Use when maximum recording time is most important; EP gives you around six hours of recording time on a DVD disc.

In addition to these settings, you can access 32 different recording quality/time settings when manual recording mode is on (see Manual Recording on page 103), giving you precise control over the recording.

When setting a timer recording there is a further option, AUTO, which maximizes the recording quality for the space available on the disc loaded at the time of recording. (If recording to the HDD, the recording quality is maximized to fit on to a DVD disc.)

In all except the FINE/MN32 modes, sound is recorded in two channel Dolby Digital format. When set to FINE/ MN32, sound is recorded in high quality, uncompressed Linear PCM format.

If the broadcast audio has a SAP channel and you are recording in Video mode or to the HDD, or in VR mode on the FINE/MN32 setting, use the AUDIO button to select the Mono, Stereo or SAP audio channel to record before recording starts.

Note

Note that all recording times (both here and those shown by the recorder) are only approximate. This is because of the way that the video is recorded; you may get slightly more or slightly less, depending on what you’re recording.

06

Restrictions on video recording

You cannot record copy-protected video using this recorder. Copy-protected video includes DVD-Video discs and some satellite broadcasts. If copy- protected material is encountered during a recording, recording will pause automatically and an error message will be displayed on-screen.

Video that is ‘copy-once only’ can only be recorded on the HDD or a DVD-RW disc in VR mode (see below).

When recording a TV broadcast or through an external input, you can display copy control information on screen. (see Displaying disc information on-screenon page 32).

CPRM

CPRM is a copy protection system with scramble system regarding the recording of ‘copy once’ broadcast programs. CPRM stands for Content Protection for Recordable Media.

This recorder is CPRM compatible, which means that you can record copy-once broadcast programs, but you cannot then make a copy of those recordings. CPRM recordings can only be made on CPRM-compatible DVD- RW (ver. 1.1 or higher) discs formatted in VR mode or on the HDD.

DVD CPRM recordings can only be played on players that are specifically compatible with CPRM.

Recording equipment and copyright

You may use this product only to reproduce or copy materials for which you own the copyright or have obtained permission to copy from the copyright owner or for which you otherwise have a legal right to reproduce or copy. Unless you own the copyright or have obtained permission from the copyright owner or otherwise have a legal right to reproduce or copy, you may be violating the law, including copyright law, and may be subject to payment of damages and other remedies.

This product incorporates copyright protection technology that is protected by method claims of certain U. S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

45

En

Image 45
Contents PRV-9200 Risk of Electric Shock Do not Open Information to UserImportant Safety Instructions POWER-CORD Caution To establish a safe level Once you have established a comfortable sound levelDecibel Level Example Contents Video/Audio Adjust menu Disc Setup menuInitial Setup menu Setting the picture quality for TV and externalFeatures Before you startBefore you start Chapter Before you start Putting the batteries in the remote control Using the remote controlBefore you start What’s in the box Compressed audio compatibility General disc compatibilityDVD-R/RW compatibility CD-R/RW compatibilityFrequently asked questions Jpeg file compatibilityPC-created disc compatibility Before you start About the internal hard disk drive Connecting up Chapter Connecting upRear panel connections Front panel connectionsVCR Connecting up Easy connectionsConnecting up Using other types of video output Connecting using an S-video outputConnecting using the component video output This enables you to watch and record TV channels This enables you to watch the output from this recorderConnect RF antenna cables as shown This enables you to watch discs This enables you to listen to multichannel surround sound Connecting up Connecting to an AV amplifier or receiverConnecting up Connecting other AV sources PluggingAfter checking all the connections, plug in the recorder Controls and displays Controls and displays ChapterFront panel Recording quality indicators Play / REC indicatorsCharacter display Channel recording indicators Controls and displays DisplayControls and displays Remote control Controls and displays Switching on and setting up Getting startedGetting started Chapter Getting started Selecting the hard disk or DVD for playback and recording Other settings you can makeConnected, or Not Connected, then press Enter Digital, Dolby Digital, DTS or PCM only, then pressGetting started Making your first recording Using the built-in TV tunerPlaying back your recording Changing TV channelsChanging audio channels Basic playbackPlaying from the HDD Playing DVD discsPlaying Video CDs Playing CDs and WMA/MP3 discsGetting started Using the Home Menu Displaying disc information on- screenHome menu options HDD and removable disc activity display Stop displayPlay display Recording display Playback Using the Disc Navigator to browse the contents of a discPlayback Chapter IntroductionPlayback Using the Disc Navigator with recordable discs and the HDDChanging the thumbnail picture for a title Use Cursor buttons to select a Title to playScanning discs Navigating discs and the HDDFrame advance/frame reverse Playing in slow motionSlow 1/2 PressPlayback Play Mode menu Search ModeRepeat Program play Repeat playRepeat to build up a program list Other Program play functionsSwitching DVD soundtracks Playback Displaying and switching subtitlesTo switch off subtitles, press Subtitle then Press Subtitle repeatedly to select a subtitle optionSwitching camera angles Playback Switching audio channelsTo display/switch the audio channel, press Audio repeatedly To switch the camera angle, press AngleRecording Chapter RecordingAbout DVD recording About HDD recordingRecording Recording time and picture quality Restrictions on video recordingRecording equipment and copyright Press REC Mode repeatedly to select a recording setting Recording Setting the picture quality/recording timeBasic recording from the TV Front panel display shows the channel numberSetting a timer recording RecordingTo stop the recording, press Stop REC Easy Timer Recording Time using Buttons12/13 MON Use Standard timer recordingCursor to the recording end time on the grid Recording end timeTo exit the timer recording screen, press Home Menu Timer recording using the VCR Plus+ programming systemUS Code VCR Plus+ programming with the power offCanceling and stopping a timer recording in progress Extending a timer recording in progressMoving the end time by 30-minute blocks Programming a new end timeTimer recording FAQ You can’t enter a timer program if the clock isn’t setSimultaneous recording and playback Set up the recorder See Connecting up for connection optionsPress REC when you’re ready to start recording Recording Recording from an external componentRecording from a DV camcorder See Ntsc on PAL TV on page 99 for more on these settingsRecording from the DV output Also, set the camcorder to VTR modePress Home Menu and select ‘DV Record’ from the menu ‘Start Rec’ and press EnterFinalizing a disc Recording Playing your recordings on other DVD playersPress Home Menu and select ‘Disc Setup’ Select ‘Initialize’ Recording Initializing a DVD-RW discIt takes about 30 seconds to initialize the disc Copying and back-up Copying and back-up ChapterHigh-speed copying One Touch Copy* HDD to DVD Copying and back-upCanceling One Touch Copy Copying and back-up One Touch Copy* DVD to HDDCopying from HDD to DVD HDD to DVD Copy List menu options Select ‘HDD DVD’HDD to DVD Copy List screen appears Select ‘Conf List’ to display the Copy List settings screen HDD to DVD Copy List commandsRecording the Copy List AddTitle Name Ttl Name EraseDivide Input a name for the selected titleCombine PreviewMove Select a command from the chapter edit menu options Erase AllChapter Edit Chpt Edit Chapter Edit Combine Chapter Edit MoveChapter you want to move, then press Enter Use Cursor buttons to select aErase Section Erase Sec Copying and back-up Copying from DVD to HDD Currently selected DVD titleRunning time Copy List Select ‘DVD DVD to HDD Copy List menu optionsDVD to HDD Copy screen appears Use Cursor up/down buttons to highlightCopying and back-up DVD to HDD Copy List commands Using disc back-up Title to move Copy List insertion pointHDD No Disc Please load a disc to be backed-up Start Cancel Editing Editing ChapterDisc Navigator screen Editing Playback will automatically stop when you do thisHDD Disc Navigator HDD group tabsDisc Navigator menu options Playlist / Original indicatorVR mode Play List Editing VR mode Original, Video mode and HDD contentPlay Select ‘Erase’ from the Disc Navigator menu optionsKey Characters Using the remote key shortcuts to input a nameStart playback of the title you want to create Inserting chapter markers into a titleNew chapter markers New chapter to beginLock / Unlock Command using the Undo option from the DiscSelect ‘Erase Sec’ from the Disc Navigator menu options Use TitleEditing HDD groups Select No if you want to cancel and leave the title intactUndo Select ‘Undo’ from the Disc Navigator menu optionsChange Group Chg Group Creating and editing a VR mode Play ListGroup Name Grp Name Input a name for the groupSelect ‘Ttl Name’ from the Disc Navigator Play EditingList menu options Select the title you want to name, then pressWant to move, press ENTER, then highlight the new Undo Undo the last commandLocation for it, then press Enter again Preview Preview chapters Select the chapter youCreate New title appears in the updated Play ListOriginal title to put into the Play List Press Enter to add the titleSelect ‘Divide’ from the Disc Navigator Play List This command erases all the titles from the Play ListMenu options Select the title that you want to divide, thenUsing the Disc History Disc HistoryDisc History Chapter PhotoViewer Chapter PhotoViewerPlaying a slideshow Reloading files from a discPhotoViewer Zooming the screenRotating the screen Disc Setup menu Chapter Disc Setup menuBasic settings Input Disc NameFinalize settings Disc Setup menu Initialize settingsHDD Initialize FinalizeVideo/Audio Adjust menu Chapter Video/Audio Adjust menuSetting the picture quality for TV and external inputs Choosing a presetVideo/Audio Adjust menu Setting the picture quality for disc playbackSelect the picture quality setting you want to adjust Audio DRC Initial Setup menu Chapter Initial Setup menuUsing the Initial Setup menu Clock SettingRemote Control Set Initial Setup menuInput Line System On Screen DisplaySetup Navigator Tuner settingsAuto Channel Setting Manual CH SettingInput Colour System Video In / Out settingsComponent Video Out Input Line System Built-in tuner External inputInput Line System Ntsc on PAL Output when Stopped Audio In settingsNtsc on PAL TV External AudioAudio Out settings Language settings DVD Menu Language Auto LanguageSubtitle Display Selecting ‘Other’ languagesManual Recording Recording settingsOptimized Rec Navi MarkPlayback settings Parental Lock Change Password Parental Lock Set PasswordSeamless Playback Parental LockParental Lock Country Code Parental Lock Change LevelAngle Indicator Setting up the remote to control your Resetting the recorderUsing the TV remote control buttons Additional informationWhen viewing on a standard TV or monitor When viewing on a widescreen TV or monitorAdditional information Screen sizes and disc formats Additional information Troubleshooting Problem RemedyGeneral Additional information Problem Frequently asked questionsCan’t use One Touch Copy HDD to DVD Can’t use One Touch Copy DVD to HDDDV-related messages About DVMaking a timer recording Setting upVideo mode Additional information Manual recording modesCountry code list Additional information Language code listLanguage Language code letter, Language code Country, Country code, Country code letterMessage Damaged discs Handling discsStoring discs Message Explanation/ActionHints on installation Additional information Cleaning the pickup lensCondensation Moving the recorderAdditional information Glossary Optical digital output Mpeg videoPCM Pulse Code Modulation PBC PlayBack Control Video CD onlyTimer Additional information SpecificationsSupplied accessories TunerIndex 123 Pioneer Electronics USA INC
Related manuals
Manual 8 pages 31.78 Kb Manual 4 pages 38.37 Kb