Digital Clock Function, HOW to SET Timer, Off

DIGITAL CLOCK FUNCTION

-THE SET HAS A BUILT-IN DIGITAL CLOCK, WHICH IS DISPLAYED IN 2 SITUATIONS:

(1)WHEN THE SET IS IN "STANDBY MODE". (THE DISPLAY WILL CONTINUOUSLY SHOW THE CURRENT TIME). IN THIS SITUATION THE BLUE BACKLIGHT

IS NORMALLY DIMMED (TO SAVE ELECTRICITY) BUT YOU CAN SWITCH ON

THE BLUE DISPLAY LIGHT BY PRESSING THE "CLOCK SET" KEY OR "TIMER" KEY ON REMOTE CONTROL. THIS WILL ACTIVATE THE BLUE LIGHT FOR APPROXIMATELY 10 SECONDS.

(2)WHEN THE SET IS IN "ON MODE" (THE BLUE LIGHT OF THE DISPLAY IS "ON" IN THIS MODE, TO INDICATE THAT THE SET IS POWERED "ON"). IN THIS SITUATION THE LCD DISPLAY NORMALLY DOES NOT AUTOMATICALLY SHOW THE CURRENT TIME. BUT YOU CAN PRESS THE "DISPLAY" KEY (ON REMOTE CONTROL)

TO SEE THE CURRENT TIME.

HOW TO SET CORRECT TIME:

SWITCH UNIT TO "STAND-BY" MODE (DISPLAY LIGHT = DIMMED)

PRESS & HOLD CLOCK SET KEY UNTIL THE "HH" HOUR DISPLAY IS FLASHING.

PRESS NEXT OR BACK REPEATEDLY TO SET THE CORRECT HOUR IN THE DISPLAY & PRESS THE CLOCK SET KEY TO CONFIRM.

PRESS NEXT OR BACK REPEATEDLY TO SET THE CORRECT MINUTE IN THE DISPLAY & PRESS CLOCK SET KEY TO CONFIRM.

CORRECT TIME IS NOW SET & WILL BE SHOWN IN THE DISPLAY.

E-7

AUTOMATIC POWER ON/OFF TIMER FUNCTION

-THIS SET HAS A TIMER FUNCTION TO ENABLE YOU TO PROGRAM THE UNIT TO AUTOMATICALLY SWITCH “ON” OR “OFF” AT PRESET TIMES. THIS IS USEFUL AS A MORNING ALARM CLOCK :

HOW TO SET TIMER

1.PRESS AND HOLD TIMER KEY (ON REMOTE CONTROL). THE ON TIME SYMBOL APPEARS IN THE DISPLAY.

2.PRESS NEXT OR BACK TO ADJUST THE HOUR OF THE DESIRED "ON" TIME AND THEN PRESS TIMER KEY TO CONFIRM.

3.PRESS NEXT OR BACK TO ADJUST THE MINUTES OF THE DESIRED "ON" TIME AND THEN PRESS TIMER TO CONFIRM.

4.NOW THE WORDING IN THE DISPLAY CHANGES TO SHOW OFF TIME .

5.PRESS NEXT OR BACK TO ADJUST THE HOUR OF THE DESIRED "OFF" TIME AND THEN PRESS TIMER TO CONFIRM.

6.PRESS NEXT OR BACK TO ADJUST THE MINUTES OF THE DESIRED "OFF" TIME AND THEN PRESS TIMER TO CONFIRM.

7.NOW THE DISPLAY WILL INDICATE THE "WAKE UP MODE" (iPod OR RADIO OR CD).

PRESS NEXT TO CHOOSE THE DESIRED MODE & PRESS TIMER TO CONFIRM.

8.THE DISPLAY THEN SHOWS THE "WAKE UP VOLUME LEVEL" (LOUDNESS). PRESS BACK OR NEXT TO DECREASE OR INCREASE THE VOLUME LEVEL TO BE

USED FOR THE MUSIC TO BE PLAYED WHEN THE TIMER SWITCHES ON THE UNIT AT THE PRE-SET TIME.

9.PRESS TIMER TO CONFIRM.

10.FINALLY THE UNIT WILL RETURN TO THE NORMAL DISPLAY, EXCEPT THAT THE TIMER SYMBOL WILL BE SHOWN, TO INDICATE THAT YOU HAVE PROGRAMMED A ON/OFF ALARM

SETTING.

11. IN CASE YOU WISH TO DISABLE THE TIMER, PRESS THE TIMER KEY ONCE, & THE TIMER SYMBOL WILL DISAPPEARS.

(NOTE : THE AUTOMATIC ON/OFF TIMER WILL SWITCH ON THE UNIT AS IF YOU HAVE MANUALLY PRESSED THE “ON/ STANDBY” KEY. IF YOU HAVE SELECTED "WAKE TO RADIO", THE EXACT PRESET RADIO BAND & STATION WILL BECOME ACTIVATED WHEN POWER SWITCHES ON).

AUTOMATIC POWER OFF SLEEP FUNCTION

-THIS SET HAS A SPECIAL SLEEP TIMER FUNCTION WHICH CAN AUTOMATICALLY SWITCH OFF THE UNIT. THIS IS USEFUL FOR SLEEPING TO MUSIC AT NIGHT.

-AT ANY TIME WHILE THE UNIT IS OPERATING, PRESS SLEEP KEY (ON REMOTE CONTROL) REPEATEDLY TO CHOOSE THE AUTOMATIC POWER OFF TIME.

OFF*

MINS

(*OFF MEANS SLEEP TIMER IS DEACTIVATED)

E-8