PYLE Audio PICD65I user service System SET UP Procedure, Fixing the Base to the Unit

Page 8

SYSTEM SET UP PROCEDURE

- INCLUDED 1 PC STAND FOR THE MAIN UNIT.

1.PLACE THE STAND UNDER THE UNIT.

2.SLIDE THE STAND UPWARD (SEE DIAGRAM BELOW).

3.STOP WHEN THE INDICATOR MARK ON THE STAND IS ALIGNED WITH THE LOCK SYMBOL ON THE REAR CABINET.

(TO RELEASE THE STAND FROM THE UNIT , SLIDE THE STAND DOWNWARDS (OPPOSITE DIRECTION) UNTIL IT BECOMES RELEASED.

CLICK

INDICATOR MARK

WHEN THE

INDICATOR MARK

ON THE STAND

IS ALIGNED

WITH THE LOCK

SYMBOL , THE

BASE IS

PROPERLY

IS PROPERLY INSTALLED.

LOCK SYMBOL

E-15

Image 8

Contents Control RemoteDisplay Important Safety Instructions See FigureRemote Control Location of Controls Important HOW to Tell if Power is on ?Automatic Power ON/OFF Timer Function Automatic Power OFF Sleep FunctionHOW to SET Timer Digital Clock FunctionElectronic Volume Control Manual Frequency Adjustment Scan ModeAutomatic Frequency Adjustment Seek Mode Radio Memory Station Preset Memory StorageInsertion and Removal of Discs Music EqualizerNormal CD Operation Programming the CD-PLAYERUsing the Audio Line in Connection AUX-INPUT SpecificationsWall Mount SET UP Repeat Playback FunctionSystem SET UP Procedure Fixing the Base to the UnitModel PICD65I Pyle Manual Plan for Approval