Roberts Radio CRD-51 manual Presetting stations

Page 15

Presetting stations

There are 20 memory presets, 10 for DAB and 10 for FM.

1

1. Press the On/Off button to switch on the radio.

2. Press the FM/DAB button to select the desired waveband.

3. Tune to the required station as previously described.

2

4. Press and release the Preset button . The display will show “Empty 1” if there are no preset stations stored.

5. Use the Tuning up or down buttons to select the desired preset

 

station number under which you wish to store the station

4,6

6.Press and hold down the Preset button until the display shows e.g. “P1 saved”. The station will be stored under the chosen preset button. Repeat this function for the remaining presets.

7. Stations stored in preset memories may be overwritten by following the above procedure.

If you need any further advice, please call our Technical Helpline on :-

5

5

020 8758 0338 (Mon-Fri)

14

 

Page 14 Page 16
Image 15
Page 14 Page 16
Contents CRD-51 Contents Controls Top Controls left side Using your clock radio for the first time Operating your clock radio DAB Selecting a station DAB Display modes DAB Manual Finding new stations DAB autoscanManual tuning DAB Dynamic range control DRC Operating your radio FM autotune Operating your radio FM manual tune Display modes FM Presetting stations Press the Preset button Recalling a preset stationSetting alarm times Weekends Setting alarm times Cancelling alarms To view alarm timeTo set the snooze time Snooze functionSleep function Setting the clock Setting the clock Clock display DimmerDisplay Backlight Headphone socket Factory Reset Software Version General Specifications Circuit featuresFuse Mains supplyGuarantee Roberts Radio Technical Services
Top Page Image Contents