Roberts Radio CRD-51 manual Dynamic range control DRC

Page 11

Dynamic range control (DRC)

DRC can make quieter sounds easier to hear when your radio is used in a noisy environment.

There are three levels of compression:

DRC 0

No compression applied. (default)

DRC 1

Maximum compression applied

DRC 1/2

Medium compression applied.

1.Press the On/Off button to switch on your clock radio.

2.Press the FM/DAB button to select the DAB band

3.Press and hold down the Menu/Display button until the display shows

"MANUAL

4.Press the Tuning up or down buttons until “DRC VAL” appears on the display. then press Select button. The display will show the current DRC value.

5.Press the Tuning up or down buttons to select the required DRC setting. Default is 0.

6.Press and release the Select button to confirm the setting. The display will return to radio mode.

If you need any further advice, please call our Technical Helpline on :-

2,6

2

3

4,5

4,5

6

020 8758 0338 (Mon-Fri)

10

 

Image 11
Contents CRD-51 Contents Controls Top Controls left side Using your clock radio for the first time Operating your clock radio DAB Selecting a station DAB Display modes DAB Manual Finding new stations DAB autoscanManual tuning DAB Dynamic range control DRC Operating your radio FM autotune Operating your radio FM manual tune Display modes FM Presetting stations Press the Preset button Recalling a preset stationSetting alarm times Weekends Setting alarm times Cancelling alarms To view alarm timeTo set the snooze time Snooze functionSleep function Setting the clock Setting the clock Display Backlight Clock displayDimmer Headphone socket Factory Reset Software Version General Specifications Circuit featuresFuse Mains supplyGuarantee Roberts Radio Technical Services