Roberts Radio How to Perform a Factory Reset on Your
Page 27

Factory Reset

If your radio fails to operate correctly, or some digits on the display are missing or incomplete, carry out the following procedure.

1.Press and hold down the Menu/Display button for 2 seconds,

2.Press the Tuning up or down buttons until “FACTORY” appears on the display, press the Select button, the display shows “RESET” and then press Select button again.

3.A full reset will be performed, the station list and presets will be erased. The display will show “RESETING” followed by “ROBERTS” after few

seconds a station scan search will be performed automatically. The display will show progress of the station search e.g. “>>>> 18”. The number on the right of the display is the number of stations that have been found.

1

2

2

3

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

26

 

Page 26 Page 28
Image 27
Page 26 Page 28
Contents CRD-51 Contents Controls Top Controls left side Using your clock radio for the first time Operating your clock radio DAB Selecting a station DAB Display modes DAB Manual Finding new stations DAB autoscanManual tuning DAB Dynamic range control DRC Operating your radio FM autotune Operating your radio FM manual tune Display modes FM Presetting stations Press the Preset button Recalling a preset stationSetting alarm times Weekends Setting alarm times Cancelling alarms To view alarm timeTo set the snooze time Snooze functionSleep function Setting the clock Setting the clock Clock display DimmerDisplay Backlight Headphone socket Factory Reset Software Version General Specifications Circuit featuresFuse Mains supplyGuarantee Roberts Radio Technical Services
Top Page Image Contents