Roberts Radio CRD-51 manual Setting alarm times

Page 17

Setting alarm times

Your clock radio has two alarms which can be set to wake you to either radio or beep type alarm. Each alarm can be set to sound once, daily, weekdays and weekends. The alarms only can be set when your clock radio is switched on.

Note : If no buttons are pressed for 5 seconds, your clock radio will exit the alarm setup.

1.Press the On/Off button to switch on your clock radio.

2.Press the Alarm button once. The display will show “SET ALM”.

3.Press Select button to enter the alarm setup. “Alarm 1” flashes.

4.Press the Tuning up or down buttons to select the desired alarm number 1-2.

5.Press Select button to enter to alarm type mode.

6.Press Tuning up or down buttons to select WAKE >DAB, WAKE >FM or WAKE >BUZ.

7.Press Select button to enter to activate mode, press Tuning up or down buttons to select ON or OFF.

If you need any further advice, please call our Technical Helpline on :-

1

2

3,5,6

4,6

4,6

020 8758 0338 (Mon-Fri)

16

 

Image 17
Contents CRD-51 Contents Controls Top Controls left side Using your clock radio for the first time Operating your clock radio DAB Selecting a station DAB Display modes DAB Manual Finding new stations DAB autoscanManual tuning DAB Dynamic range control DRC Operating your radio FM autotune Operating your radio FM manual tune Display modes FM Presetting stations Press the Preset button Recalling a preset stationSetting alarm times Weekends Setting alarm times Cancelling alarms To view alarm timeTo set the snooze time Snooze functionSleep function Setting the clock Setting the clock Display Backlight Clock displayDimmer Headphone socket Factory Reset Software Version General Specifications Circuit featuresFuse Mains supplyGuarantee Roberts Radio Technical Services