Roberts Radio CRD-9 manual Manual Tuning DAB, Signal strength display DAB

Page 10

Manual Tuning - DAB

Manual tuning allows you to tune directly to the various DAB Band III channels. UK DAB stations located in the range 11B to 12D.

1.Press and hold in the Select button until the display shows "Manual tune".

2.Press the Tuning up or down buttons to find the required DAB channel.

3.Press and release the Select button to select the channel.

4.Press the Tuning up or down buttons to select the stations contained within the Multiplex for the selected DAB channel.

5.Press and release the Select button to return to normal tuning mode.

1

2

Signal strength display - DAB

1.

Repeatedly press and release the Info button until the lower line

 

 

of the display shows signal strength.

 

 

 

 

 

 

 

2.

Position your radio and angle the telescopic aerial for best reception

1

 

using the signal strength display as a guide. Move your radio around

 

 

and position so as to give maximum number of black rectangles on

 

 

signal strength display.

 

3.The clear unfilled rectangle indicates minimum signal level required for satisfactory reception.

9

Image 10
Contents CRD-9 Contents Controls Front StandBy button Autotune button Waveband button Light buttonControls Top Mains operation Operating your radio DAB Selecting a station DAB Secondary services DAB Display modes DABFinding new stations DAB Autoselect DABManual Tuning DAB Signal strength display DABOperating your radio FM Manual tuning FM Display modes FM FM Stereo/MonoPresetting stations DAB and FM Recalling a preset station DAB and FMSystem reset Setting the alarm time Selecting alarm type Cancelling alarms Snooze functionSleep timer Headphone socket Display backlightCircuit Features SpecificationsAerials Mains supply GeneralFuse Guarantee Roberts Radio Technical Services