Roberts Radio CRD-9 manual Aerials, Specifications, Circuit Features

Page 21

Aerials

As supplied your clock radio is fitted with a telescopic aerial. Should this prove inconvenient a separate wire aerial can be fitted in place of the telescopic aerial.

A spanner is provided to allow removal of the telescopic aerial. The wire aerial can then be plugged in place of the telescopic aerial.

Note : In areas where signals are weak the wire aerial may not prove to be as effective as the telescopic aerial.

Specifications

Power Requirements

Mains

AC 230 volts, 50Hz

only

Frequency Coverage

 

 

 

FM

87.5-108MHz

 

 

DAB

174.928 - 239.200MHz

Circuit Features

Loudspeaker

75mm 8ohms

Output Power

0.9 Watts

Headphone socket

3.5mm dia

Aerial System FM

Telescopic aerial or alternative wire aerial

DAB

Telescopic aerial or alternative wire aerial

20

Image 21
Contents CRD-9 Contents StandBy button Autotune button Waveband button Light button Controls FrontControls Top Mains operation Operating your radio DAB Selecting a station DAB Display modes DAB Secondary services DABAutoselect DAB Finding new stations DABSignal strength display DAB Manual Tuning DABOperating your radio FM Manual tuning FM FM Stereo/Mono Display modes FMRecalling a preset station DAB and FM Presetting stations DAB and FMSystem reset Setting the alarm time Selecting alarm type Snooze function Cancelling alarmsSleep timer Display backlight Headphone socketSpecifications Circuit FeaturesAerials General Mains supplyFuse Guarantee Roberts Radio Technical Services