Roberts Radio CRD-9 manual Setting the alarm time

Page 16

Setting the alarm time

1.Repeatedly press and release the Info button until the display shows Alarm Status.

2.Press the Select button the display will show Alarm Time Set. The minutes digits will begin to flash in the display. Set the required minute using the Tuning Up/Down buttons.

3.Press the Select button. The hours digits will begin to flash in the display. Set the required hour using the Tuning Up/Down buttons.

4.Press the Select button to confirm the alarm setting. The display will show Alarm Status On together with the alarm time. After a few seconds the display will revert to showing real time.

A symbol will appear in the display indicating that the alarm is

active.

Note: Alarm times are set using 24Hr format e.g. 2:30PM is entered as 14:30

1

2

22

3

33

2

15

Page 15 Page 17
Image 16
Page 15 Page 17
Contents CRD-9 Contents Controls Front StandBy button Autotune button Waveband button Light buttonControls Top Mains operation Operating your radio DAB Selecting a station DAB Secondary services DAB Display modes DABFinding new stations DAB Autoselect DABManual Tuning DAB Signal strength display DABOperating your radio FM Manual tuning FM Display modes FM FM Stereo/MonoPresetting stations DAB and FM Recalling a preset station DAB and FMSystem reset Setting the alarm time Selecting alarm type Cancelling alarms Snooze functionSleep timer Headphone socket Display backlightCircuit Features SpecificationsAerials Mains supply GeneralFuse Guarantee Roberts Radio Technical Services
Top Page Image Contents