Roberts Radio CRD-9 manual System reset

Page 15

System reset

f your radio fails to operate correctly, or some digits on the display are missing or incomplete carry out the following procedure.

1.Press and hold in the Info button until the display shows the software version.

2.Press the Info button twice the display will show System reset.

3.Press in and release the Select button to select System reset.

4.If DAB was used last then a "Quick scan" of the DAB band will be performed, otherwise a "Quick scan" will be carried out the next time the DAB band is selected.

If a problem persists our technical staff would be pleased to help offer any assistance on operating the radio. Our technical helpline number is 020 8758 0338.

1

3

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

14

 

Page 14 Page 16
Image 15
Page 14 Page 16
Contents CRD-9 Contents StandBy button Autotune button Waveband button Light button Controls FrontControls Top Mains operation Operating your radio DAB Selecting a station DAB Display modes DAB Secondary services DABAutoselect DAB Finding new stations DABSignal strength display DAB Manual Tuning DABOperating your radio FM Manual tuning FM FM Stereo/Mono Display modes FMRecalling a preset station DAB and FM Presetting stations DAB and FMSystem reset Setting the alarm time Selecting alarm type Snooze function Cancelling alarmsSleep timer Display backlight Headphone socketSpecifications Circuit FeaturesAerials General Mains supplyFuse Guarantee Roberts Radio Technical Services
Top Page Image Contents