
Setting the alarm clock |
| Radio Stations |
|
| |
Your radio has four separate alarms which can be set to wake you to |
| Media Player |
| Auxiliary input | |
either a radio station or a buzzer alarm. Each alarm can be set to sound |
| |
| Alarm clock | |
either once, everyday, weekly, weekdays or at weekends. In the event of |
| |
a power interruption your radio has a built in memory chip that will retain | Configure | |
your alarm settings. |
| Off |
Note: If no buttons are pressed for 10 seconds the radio will exit the alarm |
|
|
setup. If you make a mistake at any point, use the Back option to go back |
| Set Alarms |
to the previous screen. |
| |
|
| Sleep timer |
1. Use the Select control to switch on your radio and to access the menus. If needed, use the Back option to access the main Mode menu.
<<Back
2.Rotate the Select control until the 'Alarm clock' is highlighted on the display. Press the Select control to enter the alarm settings.
3.Rotate the Select control until 'Set Alarms' is highlighted on the display then press the Select control. The display will show the status of alarms
4.Rotate the Select control until the desired alarm 1 - 4 is highlighted on the display. Alarms which are not highlighted show the time of the next alarm (if any) and the day of the week on which they will occur. The currently highlighted entry will scroll through the full alarm details including whether the alarm is daily, weekly, etc. and the details of the alarm type (buzzer or radio station name).
5.To change the setting for the highlighted alarm press the Select control. The alarm hour will be highlighted. The 12 hour or 24 hour clock format will be used according to the currently selected clock format option (please see page 42).
Disable all
1 OFF
2 OFF
3 OFF
4 OFF
Set Time
00:00 AM
If you need any further advice, please call our Technical Helpline on :- | 44 | |
020 8758 0338 | ||
|