Configuring the radio to use either an Ethernet or a
3.Selecting the 'Auto' option from the 'Wired / Wireless' menu will cause the radio to restart. It will then attempt to establish an Ethernet connection to the network. If no Ethernet connection is available the radio will attempt to establish a
Having established a particular type of connection to the network, this connection will remain in use while the radio is on.
The Network Configuration menu also allows you to choose whether or not the Internet radio displays a warning message when the
Entering the network name manually
If your network is configured with a hidden ESSID, then you will need to enter the network name manually.
1.In the Network Configuration menu, select 'Enter network name'. A string of characters will be displayed. You can scroll through this list by turning the rotary control or by pressing the Menu up or Menu down buttons. The centre character will be entered into the network name each time that you press Select.
If you make an error, either use the Back button on the remote control, or give a long press on the rotary control.
2.When the name has been entered, locate the END symbol in the string of characters and then press Select. The radio will then try to connect to the named network. The remainder of the connection procedure should then be followed - see page 13, step 9.
3
1,2
Auto
Wired Only
Wireless Only
<< Back
Scan for networks
Enter network name
View Config
mnopq r stuvw
Les's-netwo█
()~ |
| ◄ ►01 |
END | ||
Les's |
|
Connecting to
network
If you need any further advice, please call our Technical Helpline on :- | 52 | |
020 8758 0338 | ||
|