Backlight
This option allows you to alter the radio’s display backlight settings to suit | Radio Stations | ||
your needs. Separate settings are available for Active mode (while using | Media Player | ||
the menu system), Inactive mode (when listening), and Standby mode | Auxiliary input | ||
(when the radio is off with just the clock display showing). | Alarm clock | ||
| Configure | ||
1. | Use the Select control to switch on your radio and to access the menus. | Off | |
| If needed, use the Back option to access the main Mode menu. |
| |
2. | Rotate the Select control until 'Configure' is highlighted on the display. | Aux Input Level | |
| Press the Select control to enter the Configure menu. | ||
|
| Backlight | |
3. | Rotate the Select control until 'Backlight' is highlighted on the display. | Language | |
| Press the Select control to enter the Backlight menu. | Clock Setup | |
4. | The backlight setting can be adjusted for ‘Active’, ‘Inactive’and ‘Standby’ |
| |
| modes. Rotate the Select control to highlight the desired backlight | Active | |
| option then press the Select control. | ||
|
| Inactive | |
5. | The radio will now display the setting for the selected backlight option. | Standby | |
<<Back | |||
| You can alter this value by rotating the Select control to increase or |
decrease it according to your needs.
6.When the desired value is reached, press the Select control to store the setting. If the value is not modified or stored after five seconds, the radio exit the Backlight menu and will return to its previous display.
Active Level
27
Active Level
Set to 27
49