Operating your radio - FM
1. Carefully extend the telescopic aerial.
2
2.Press the On/Off button to switch on your radio. The display will show "ROBERTS" for a few seconds.
3.Press the Band button to select the FM band.
3
4.Press and release the Select button until the display shows "Auto tune <>".
5.Press the Tuning Up button. Your radio will scan from the currently displayed frequency direction upwards and will stop scanning when it fi nds a station of suffi cient strength.
5
6. | The display will show the frequency of the signal which has been | 4 |
| found. If RDS information is available, after a few seconds the display | |
| will show the radio station name. The display will also show "St" and |
|
| "RDS" on the upper line if the station is received with stereo and RDS |
|
| information. |
|
7. | Press the Tuning Down button to scan the FM band in a downwards |
|
| direction (high frequency to low frequency). |
|
8. | When the end of the waveband is reached your radio will recommence | 7 |
| tuning from the opposite end of the waveband. |
9.Adjust the Volume control to the required setting.
10.To switch off your radio press the On/Off button.
13