Software version
The software display cannot be altered and is just for your reference.
1. To view the software version on the display press and hold the Info | 1 |
button for 2 seconds. |
|
2.Repeatedly press the Tuning Up/Down buttons until “SW Version” together with the version number appears on the display.
3. After a few seconds the display will revert to the normal display mode.
2
System reset
If your radio fails to operate correctly, or some digits on the display are missing or incomplete carry out the following procedure.
1.Press and hold down the Info button for 2 seconds
2.Repeatedly press the Tuning Up/Down buttons until the display shows "Factory reset", then press the Select button.
1
3.If you wish to perform the reset operation, press the Select button one more time. A full reset of your radio will be performed. All presets and station lists will be erased.
4. After a system reset a scan of the DAB band will be performed. | 2 |
In case of malfunction due to electrostatic discharge, reset the product
(reconnection of power source may be required) to resume normal 2,3 operation.
If a problem persists our technical staff would be pleased to offer any assistance on operating the radio. Our technical helpline number is 020 8758 0338.
19