Manual tuning - FM
1. Press the On/Off button to switch on your radio.
1
2.Press the Band button to select the FM band. Fully extend the Telescopic aerial.
3.Press and release the Select button until the display shows "Manual tune < >".
2
4.Press either the Tuning Up or Down buttons to tune to a station. The frequency will change in steps of 50kHz. Pressing and holding one of the buttons will advance the frequency selection several times each second.
5. | When the end of the waveband is reached the radio will recommence | 4 |
| tuning from the opposite end of the waveband. | |
6. | Adjust the Volume control to the required setting. | 3 |
7.To cancel the ManualTune option, press and release the Select button again so that the display shows "Auto tune < >".
6
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338
14