SB4000 Specifications

Nominal Output Power per Channel	........................................................................................... 5 Watts RMS
Total Harmonic Distortion (THD)	0.3% at 1 Watt
Frequency Response	30Hz to 20kHz
Signal-to-Noise Ratio (S/N)	>65dB Maximum
Headphone Output Impedance	32ohms
Headphone Output Level (Variable)	500mV (Maximum)
Headphone Connector Type	3.5mm Stereo Jack (1/8”)
Auxiliary Input Impedance	6K ohms (Nominal)
Auxiliary Input Level	2.0 Volts (Maximum)
Auxiliary Connector Type	3.5mm Stereo Jack (1/8”)
Battery Type/Qty	“D” Cell / 8 Total
Overall Dimensions	19”(W) x 6-7/8”(D) x 8”(H)
...........................................................................................................	485mm(W) x 176mm(D) x 198mm (H)
Overall AC Adapter Dimensions	4-3/4”(W) x 2-1/2”(D) x 3.-5/32”(H)
...............................................................................................................	120mm(W) x 64mm(D) x 80mm (H)
Weight (Without Batteries)	5.88lbs. (2670g)

8
	SB4000 Boombox User Guide

Periodic Inspection

The SB4000 Boombox should be inspected periodically for external damage. At least once every 30 days of use, perform the following checks:

1.Inspect the 16-pin Orbiter SR4000 Receiver connector for loose, bent or broken pins, misalignment, etc. Make sure the RF Connector (Antenna) is intact and exhibits no apparent damage.

2.Check the VOL control for freedom of motion without binding of any kind.

3.Check that the Mode Selector push-button operates correctly in that it toggles between the Satellite Radio output and theAUX input.

4.Make sure the antenna connector at the rear of the unit is free from damage of any kind and that the antenna lead plug mates correctly and securely.

5.Make sure the DC 12V input connector at the rear of the unit is also free from damage of any kind and that the AC Power Adapter plug mates correctly and securely.

6.Check the antenna for any physical damage; make sure the antenna cable is secure and not nicked or cut.

7.Inspect the overall Boombox case and speaker grilles for damage such as nicks, scratches, punctures, etc.

Cleaning the SB4000 Boombox

When cleaning the Boombox, make sure the AC Power Adapter is unplugged from the power source. Do not use liquid cleaners or aerosol cleaners. Use a lint-free cloth lightly dampened with water for cleaning the exterior of the Boombox only.

	9
SB4000 Boombox User Guide