HP V8.5 manual Specification S

2

S P E C I F I C A T I O N S

~Form feed adjust F2, F4, F8, tF, PF - selects formfeed of 2, 4, 8 inches, Top of Form sensing, and programable past top of form respectively.

~Bytes per scan b1, b2 - selects 216 and 264 bytes per scan respectively.

~Grayscale levels per scan g1, g2, g3, g4 - selects 8, 16, 32, and 64 levels of gray levels per scan respectively.

#Grayscale media calibration table number t1, t2.

Settings marked with (*) are used exclusively with bi-modal plotting. Settings marked with (#) are used exclusively with grayscale plotting. Settings marked with (~) are used with both bi-modal and grayscale plotting.

Plot speeds	Paper 1.0, 2.0, 3 .0, and 4.0 inches per second
	in bimodal (black and white) plotting mode.
	Film: 1.0 inch per second.
	Grayscale: dependent upon the number of levels
	of grayscale selected.

Condition detection Media out. Top of form. Head temperature.

24 volt error detection.

2- 2 V8.5eRev2.2.2002