T R O U B L E S H O O T I N G
Plot has vertical white stripes
7
Figure7-3.Plotwithverticalwhitestripes
Possible causes: Lid is not securely closed The printhead is dirty
Some printhead nibs are burnt out
Solutions:
1.Check that the media is installed correctly and the plotter lid is securely closed. The top of the lid should be flush with the top of the side panels.
2.Clean the printhead as described in Chapter 6, page
3.The thermal printhead has one or more burnt out nibs so it must be replaced. Contact your authorized service center.
V8.5eRev2.2.2002 |