T R O U B L E S H O O T I N G
Plot contrast is weak
Possible causes: Lid is not securely closed Latch pins need adjustment Media setting is incorrect Contrast setting is too low
24 V power supply is malfunctioning
Solutions:
7
1.Check that the media is installed correctly and the plotter lid is securely closed. The top of the lid should be flush with the top of the side panels.
2.If the lid does not close securely, or if the head pressure is too low, contact your authorized service center.
3.Check that the media setting is correct. See Chapter 4, page
4.Adjust the contrast setting as described in Chapter 4, page
V8.5eRev2.2.2002 |
