O P E R A T I O N
Grayscale media table number
t1 - media calibration table for media 1.
t2 - media calibration table for media 2.
These tables have preset values for imaging on two different medias while in grayscale mode. These medias can be changed for different medias by uploading new tables.
Setup headers for programming the V8.5e
NOTE: The V8.5E must be in PRINT mode for the setup header string to work. Numeric values shown below are hexadecimal, not ASCII.
4
NOTE: | All menu functions can be remotely configured by | ||
| sending a setup header string from the host to the | ||
| V8.5E through the interface. The programmable | ||
| advance past TOF can be programmed in a similar | ||
| fashion. |
|
|
NOTE: | Sending a 00 hex in any of the setup string positions | ||
| listed below allows the menu item to remain | ||
| unchanged. |
|
|
The format is as follows: |
|
| |
Byte 1: | escape code | =99 |
|
Byte 2: | contrast | C1=11 | Lightest |
|
| C2=12 |
|
|
| C3=13 |
|
|
| C4=14 |
|
|
| C5=15 |
|
|
| C6=16 |
|
|
| C7=17 |
|
|
| C8=18 | Darkest |
|
| No Change=00 | |
V8.5eRev2.2.2002 |
|
| |
