3
I N S T A L L A T I O N
Inspect the plotter and components for any damage that may have occurred during shipment. Report any damage to the carrier of the shipment, and to your Imaging Systems Group Inc. product representitive.
Keep the box and packaging for future shipping, in the event of servicing or upgrading issues. This product must be returned to our factory in the original or proper packaging material. Damage caused during return shipping or due to improper packaging will not be covered by The Imaging Systems Group Inc. During shipping or storage, place a length of thermal paper between the printhead and roller. This prevents damage caused by the two components sticking together.
3.2MOUNTING AND POSITIONING
Keep the V8.5e away from direct heat sources, including sunlight. Do not block the vents on the sides of the plotter.
CAUTION: Make sure the thumbscrews are secured before operation. Thisisparticularlyimportantinmobilesituations.Damagetotheplotter orrackcomponentscouldresultiftheplotterbecomesunstable.
VORSICHT: Versichern Sie sich vor dem Betrieb des Gerätes, dass die Flügelschrauben festgestellt sind. Das ist besonders in beweglichen Konstellationenwichtig.SolltederPlotterinstabilwerden,kanndies zu Schäden am Plotter oder am Gestell führen.
V8.5eRev2.2.2002 |
