LaserSpeed 8000-3 Instruction Handbook
LaserTrak Software
Chart Recorder Screen
Gauge Info
Length (m) – the length on the LaserSpeed gauge’s length counter. The length is accumulation from the last time the gauge was reset. Length is displayed in the units set during gauge Configuration.
Vel (m/min) – the instantaneous speed measured by the LaserSpeed gauge. The speed is displayed in the units set during gauge Configuration.
QF- the instantaneous Quality Factor measured by the LaserSpeed gauge. QF is displayed as a number between 0 and 15, where 15 represents the best and 0 represents no measurements being made.
Average QF- the average of all the QF readings since the LaserTrak software started acquiring data from the gauge. This value is
Part No. 93463 / Drawing No. | Page 99 of 221 | Revision A (Sep 2007) |
