Laser LS8000-3 manual Read One Line of TT Data, Stop Real-time Output

LaserSpeed 8000-3 Instruction Handbook

RS-232/RS-422 Communication

79,+000000741,000012344,15,63,3125<CR>

79,+000000864,000012342,15,63,3125<CR>

These readings indicate the length increasing from +0.370 to 0.864, with a velocity near +12.345, a Quality Factor of 15, Status of 63, and an internal gauge temperature of 31.25ºC.

TV Read One Line of TT Data

TV<CR> Data Output Command

Response Format: Variable (Depends on TT Value)

This command will cause the LS8000-3 to transmit one line of data in the format configured by the TT command. See the TT command for details.

. Stop Real-time Output

.<CR> Command

This command stops the LS8000-3 from sending real-time measurement data. This command has the same effect as just sending a <CR>.

Part No. 93463 / Drawing No. 0921-01561 Page 159 of 221 Revision A (Sep 2007)