Laser LS8000-3 manual RCR or, R0CR

		LaserSpeed 8000-3 Instruction Handbook
		RS-232/RS-422 Communication
		Quality Factor Current Value
Q
Q<CR>	Read Only Command
	Response Format: <N>
	<N> is an integer from 0 to 15 indicating the current Quality Factor. A QF of 0 indicates that
	the gauge is not currently making measurements, and a QF of 15 indicates that the gauge is
	making excellent measurements.
	This command returns the same value as you would normally receive from the TE data, or in
	a response to the V command.
		Reset Internal Length Count
R
R<CR> or	Command
R0<CR>
	This command causes the LS8000-3 to reset its internal length count, and to reset the Index
	Pulse location to 0.

Part No. 93463 / Drawing No. 0921-01561 Page 136 of 221 Revision A (Sep 2007)