
LaserSpeed 8000-3 Instruction Handbook
LaserTrak Software
Velocity is set during gauge Configuration. Set the "Hold Velocity if Above" setting to a large value (like 900,000.000) to disable this feature.
LaserTrak Toolbar
Top line of Chart Recorder Screen- shows the Gauge type and the
COM port parameters
or Ethernet parameters
LaserTrak Menus
File Menu
New- selects between the Chart Recorder Screen, Monitor screen and Length Mode Screen
Open Recipe File- opens a previously stored recipe file that holds the operating parameters for the gauge.
Open Graph- opens a previously stored graph or graph configuration.
Close- closes the window
Save Recipe File- Stores a recipe file that contains all the current operating parameters of the gauge.
Save Graph- Stores the data displayed in the graph, a picture of the graph, or the current graph configuration.
Print- prints a copy of the current screen that is being displayed
Part No. 93463 / Drawing No. | Page 101 of 221 | Revision A (Sep 2007) |