![](/images/new-backgrounds/1142886/142886205x1.webp)
LaserSpeed 8000-3 Instruction Handbook
LaserTrak Software
Enable Vertical Tracking on Start- When Checked, autoscaling on the the vertical axis will automatically be turned on each time the Start Readings button is pressed.
Unlock- Unlocks the Factory Setting or the Terminal Assist. Factory Settings and Terminal Assist are both password protected. The Factory Setting should only be accessed by authorized personnel. Terminal Assist can be used to manually send
commands (like when using HyperTerminal) to help diagnose communication problems. The password for Terminal Assist is “laser1”.
Note: You must unlock the gauge settings with the "*LOCKED=0" command before settings can be changed with Terminal Assist.
Part No. 93463 / Drawing No. | Page 103 of 221 | Revision A (Sep 2007) |