Laser LS8000-3 Application Interfaces, Light Stack Interface, Setting Value Command, #9CR, $L9CR

LaserSpeed 8000-3 Instruction Handbook

Interfacing with the LS8000-3

Application Interfaces

Light Stack Interface

The LS8000-3 User Scaleable Pulse Outputs and Index Pulse output can be reconfigured and connected to a light stack in order to indicate the current state of the laser in order to warn people in the area of laser radiation. The pulse outputs can be reconfigured into a light stack interface by setting the following settings:

Setting	Value	Command
Index Pulse Output Function	Light Stack (Green)	#9<CR>
User Scaleable Pulse Output	Light Stack (Yellow/Red)	$L9<CR>
Configuration

The outputs can then be connected to solid state relays in order to drive a light stack as shown below. This will provide a contact closure for each lamp. The maximum current that can be driven by this interface will depend on the selected relay.

Part No. 93463 / Drawing No. 0921-01561 Page 71 of 221 Revision A (Sep 2007)