Laser LS8000-3 manual Analog Output Voltage/Ground Pins, Analog Output Specifications

LaserSpeed 8000-3 Instruction Handbook

Interfacing with the LS8000-3

			Cable Jacket
			Cable Shield
Pin 1	(TX+)		RX+
			100Ω	Receive
Pin 2	(TX-)	RS-422 Cable	RX-

Pin 3 (RX+)	Shielded,
	Two Twisted 100Ω Pairs

Pin 4 (RX-)

Drain Wire/Shield

TX+

Transmit

TX-

Computer/PLC

RS-422 Serial Pinouts

Gauge DB9	Gauge Signal	Computer Pin	Computer Signal
Pin Number	Description	Number	Description
1	RS422 Transmit +	varies	RS422 Receive + (B)
2	RS422 Transmit -	varies	RS422 Receive – (A)
3	RS422 Receive +	varies	RS422 Transmit + (B)
4	RS422 Receive -	varies	RS422 Transmit – (A)
5	Signal Ground	varies	Signal Ground

The computer RS-422 pinout can vary with the RS-422 card used. The signal descriptions listed above should be matched to the signal descriptions listed in the documentation provided with the RS-422 adapter.

Analog Output Voltage/Ground (Pins 6-7)

Analog Output Specifications

Voltage Range	0-2V
Resolution	12-bit
Minimum ∆V (Step Size)	0.5mV
Load	1kΩ minimum
Filtering	0.1∝F Capacitor
	Recommended across
	Output to Signal Ground

Part No. 93463 / Drawing No. 0921-01561 Page 57 of 221 Revision A (Sep 2007)