Laser manual LS8000-3 25-Pin Connector Pinout, Pin Description

LaserSpeed 8000-3 Instruction Handbook

Installing the System

LS8000-3 25-Pin Connector Pinout

Pin Description

1RS-232 Transmit (from LS8000-3 to host)

2RS-232 Receive (from host to LS8000-3)

3Phase A True – High Speed Output (RS-422 Drivers)

4Phase A False – User Scaleable (5-24V Output)

5Phase A False – High Speed Output (RS-422 Drivers)

6Phase B True – User Scaleable (5-24V Output)

7Phase B True – High Speed Output (RS-422 Drivers)

8Phase B False – User Scaleable (5-24V Output)

9Phase B False – High Speed Output (RS-422 Drivers)

10Material Present Input (5-24V Input)

11Signal Ground for Inputs/Outputs/Serial

12Power Ground for 24V Input

13Power Ground for 24V Input

14Measurement Direction Input (5-24V Input)

15Phase A True – User Scaleable (5-24V Output)

16Laser Interlock (Connect to Signal Ground to Turn On Laser)

17Shutter Control (Connect to Signal Ground to Open Shutter)

18Length Reset Input (5-24V Input)

19Signal Ground for Inputs/Outputs/Serial

20User VIN – Voltage input for Isolated Pulse Outputs (5 to 28V DC). The voltage supplied will be the voltage level of the pulse outputs supplied by the LS8000-3. If a Voltage is not supplied, the pulse outputs will be approximately 4.5V.

21Signal Ground for Inputs/Outputs/Serial

22Index Pulse True - User Scaleable (5-24V Output)

23Index Pulse False - User Scaleable (5-24V Output)

2424V Fused Input

2524V Fused Input

Part No. 93463 / Drawing No. 0921-01561 Page 26 of 221 Revision A (Sep 2007)