Laser LS8000-3 manual Software Installation Procedure, Starting LaserTrak

LaserSpeed 8000-3 Instruction Handbook

LaserTrak Software

Software Installation Procedure

Complete the following steps to install the LaserTrak software:

1)Insert the LaserTrak for Windows Setup CD into your CD-ROM drive.

2)From the Start menu select Run.

3)Browse to the LaserTrak_4_Setup.exe program on the CD-ROM Drive and select it.

4)Press OK.

The setup program installs the software into the default directory “c:\Program Files\BLM LaserTrak 4.0”. The install program gives you a chance to accept the default directory or install it in a directory of your own choosing.

The setup program does the following:

1)Creates a folder and group for the LaserTrak program and files and puts the LaserTrak program icon into your desktop.

2)BLM LaserTrak 4.0 is added to the Windows

Start Programs menu under BLM LaserTrak 4.0

Starting LaserTrak

Once the LaserTrak software has been installed the LaserTrak software will automatically start. If LaserTrak does not automatically start, go to the Start Menu and click on the LaserTrak program…

… or double click the LaserTrak Icon on your desktop.

Part No. 93463 / Drawing No. 0921-01561 Page 96 of 221 Revision A (Sep 2007)