Laser LS8000-3 manual Laser Classification, Peak Power 50mW Wavelength 650-810 nm

LaserSpeed 8000-3 Instruction Handbook

Safety Information

Laser Classification

The Model LS8000-3 Non-contact Length and Speed Gauge (Model LS8000-3) is classified as a IIIb laser device. This category contains infrared and visible laser devices with powers up to 500 mW. The optical gauge in the system uses a 50 mW solid-state laser device operating between 760 and 800 nm (near infrared region of the spectrum).

A class IIIb product must have the following safety features:

VISIBLE AND INVISIBLE

LASER RADIATION

AVOID EXPOSURE TO BEAM CLASS 3B LASER PRODUCT

PEAK POWER 50mW

WAVELENGTH 650-810 nm

Complies with EN60825-1:2001. Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated July 26, 2001.

WARNING - NO USER SERVICEABLE

PARTS. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

A5-second delay after power-up before laser radiation is emitted from the gauge.

An indicator light to inform personnel near the gauge that laser radiation is being emitted.

A mechanical device to physically block the laser beam from exiting the gauge.

An interlock circuit to shut off the laser when the circuit is opened.

All hazards must be properly identified with warning labels.

These basic safety features are incorporated to promote safe operation of the laser.

A class IIIb laser must also have a key switch to power the laser, ensuring that only trained personnel can operate the instrument. Because the location of the gauge can often make it difficult to access a key switch, the key switch needs to be installed by the final user. It should be placed in a location that will be readily accessible to the operators. For more information on installing the laser key switch, see the Installing the System section.

The user of a laser device must comply with a different set of regulations. Many countries and individual states have passed legislation regarding the use of laser products.

Part No. 93463 / Drawing No. 0921-01561 Page 10 of 221 Revision A (Sep 2007)