![](/images/new-backgrounds/1142886/142886189x1.webp)
LaserSpeed 8000-3 Instruction Handbook
LaserTrak Software
LaserTrak Software
LaserTrak® is a
There are several features available with the LaserTrak software. LaserTrak mimics a chart recorder output on the screen and monitor the speed, length and Quality Factor in real time and presents a time history depiction of the data. LaserTrak can acquire and store data, and load and display stored data from a previously acquired data file.
LaserTrak for Windows
Note: LaserTrak Version 4.0 or later must be used with the LS8000 gauge.
Installing the LaserTrak Software
This section includes the information you need to install and begin using your copy of LaserTrak:
System Requirements
500 MHZ Pentium Computer Minimum (2 GHz Pentium Computer recommended)
Windows 98, NT, 2000 or XP (Windows 2000 or XP recommended)
256 MB RAM
15" Monitor or bigger
50 MB of Hard Drive Space
®Windows 98, NT 2000 and Windows XP are registered trademarks of Microsoft Corporation.
Part No. 93463 / Drawing No. | Page 95 of 221 | Revision A (Sep 2007) |