LaserSpeed 8000-3 Instruction Handbook

LaserTrak Software

Standard Tab- shows common operating parameters for the LaserSpeed gauge. These parameters can be used to tailor the gauge operation to fit a specific application. The entry fields are either direct entry or a pull-down menu. Once all the operating parameters are set, press the Update button to update the parameters in the gauge. A tool tip will

indicate the range of numbers valid for that entry field when the cursor is placed over a direct entry field for a few seconds. For the direct entry field the number can be entered

without a carriage return. Just enter the number and move to the next field.

Once the parameters in the gauge have been updated to the gauge, they are permanently stored in the gauge until a different set of operating parameters are Updated to the gauge.

Communication Tab- screen shows the communication parameters used by the gauge to communicate via RS232, RS422 and Ethernet.

Once the parameters in the gauge have been updated to the gauge, they are permanently stored in the gauge until a different set of operating parameters are Updated to the gauge.

Part No. 93463 / Drawing No. 0921-01561

Page 107 of 221

Revision A (Sep 2007)

Page 107
Image 107
Laser LS8000-3 manual Part No / Drawing No 107 Revision a Sep