Laser LS8000-3 manual Safety Information, Intended Use

LaserSpeed 8000-3 Instruction Handbook

Safety Information

Safety Information

•Under NO circumstances should the earth safety connections be broken – internal damage to sensitive electronic components may occur and at worst electrocution to personnel may result.

•This equipment must be earthed/grounded.

•Relays and associated wiring are rated for SELV levels i.e. 60 VDC & 30 VAC RMS. These levels must not be exceeded.

•Maintenance, repairs and electrical connections should be performed by a suitably qualified person for the country of installation.

•Input power to the equipment is of direct current type designated by the symbol on equipment housing and shown below.

Reference: IEC 60417-5031

•The equipment contains a slow blow type fuse to protect against input power overloads and is not user replaceable.

Intended Use

If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired.

Part No. 93463 / Drawing No. 0921-01561 Page 9 of 221 Revision A (Sep 2007)