Laser LS8000-3 manual Default Gateway Address, Response *IPADDR=192.168.0.213CR

LaserSpeed 8000-3 Instruction Handbook

RS-232/RS-422 Communication

Response: *IPADDR=192.168.0.213<CR>

This setting can be disregarded if the Ethernet option is not installed.

Note: This setting will take effect after a power-cycle.

*IPDEFGW		Default Gateway Address
*IPDEFGW?<CR>	Read
	Response Format: *IPDEFGW=<N><CR>

*IPDEFGW=<XXX.XXX.XXX.XXX><CR>

Set

Where <XXX.XXX.XXX.XXX> is an IP Address, such as "192.168.10.246". This command can be used manually set the IP Address of the Default Gateway, or to read back the IP Address assigned by the DHCP server.

If the DHCP option is enabled, the value stored for this setting is ignored, and the IP Address read from the DHCP server is returned. If there was an error contacting the DHCP server, then the IP Address is returned as 0.0.0.0.

If DHCP is disabled, then this command is used to manually set the Default Gateway Address.

Example: (DHCP disabled)

To set the Default Gateway Address:

Command: *IPDEFGW=192.168.0.213<CR>

…and then read it back

Command: *IPDEFGW?<CR>

Response: *IPDEFGW=192.168.0.213<CR>

This setting can be disregarded if the Ethernet option is not installed.

Note: This setting will take effect after a power-cycle.

Part No. 93463 / Drawing No. 0921-01561 Page 153 of 221 Revision A (Sep 2007)