
LaserSpeed 8000-3 Instruction Handbook
LaserTrak Software
The Communication screen will then be displayed showing the COM port and BAUD rate and communication parameters it found to communicate with the gauge.
Shows the COM Port and Settings used to establish communication
Click the OK button to go to the Chart Recorder Screen. The Chart Recorder screen will acquire Speed, Length, Quality Factor and Status data from the LaserSpeed gauge and display it. The Speed and Quality Factor will be displayed graphically and the Length and Status information will be displayed in a table format.
Press the Start Readings button to acquire data from the gauge. The Start Readings button will change to Stop Readings button. Press the Stop Readings button to stop acquiring data from the gauge. The graph, Graph Info and Gauge Status will only be active when acquiring data from the gauge, and the Stop Reading Button is being displayed. All the data will be frozen on
the Chart Recorder screen when the Stop Readings button is pressed and the button changes back to Start Readings again.
Part No. 93463 / Drawing No. | Page 98 of 221 | Revision A (Sep 2007) |