Laser LS8000-3 manual Heavy Industrial Cables

LaserSpeed 8000-3 Instruction Handbook

Interfacing with the LS8000-3

Heavy Industrial Cables

LaserSpeed heavy industrial cables are designed for use in heavy industrial environments where high temperatures and heavy coolant spray are encountered. They have an extremely durable outer jacket, and are impervious to industrial lubricants, coolants, and solvents.

Never pull the cable by the connector. Always attach the pulling cable to the cable itself. Pulling the cable by the connector may damage the connector pins. The circular connector has a protective end cap that should be screwed over the cable pins when pulling through conduit, or any time the cable is disconnected from the LS8000.

The cable must be screwed onto the LS8000-3 connector until it fully seated— the yellow stripe on the LS8000-3 connector is not visible when the cable is fully tightened.

Part No. 93463 / Drawing No. 0921-01561 Page 62 of 221 Revision A (Sep 2007)