Laser LS8000-3 manual Banner D10 Through Beam Switch, Single through beam, Signal D10 LaserSpeed

LaserSpeed 8000-3 Instruction Handbook

Interfacing with the LS8000-3

Banner D10 Through Beam Switch

Single through beam

Signal	D10	LaserSpeed
Power (+12 v to +24v)	Brown	N/A
Material Present	White	10
Signal Ground	Blue	11

Notes:

Use with a LaserSpeed 4000-2, 8000-2, 8000-3 or 9000-3

See the Connecting Material Present Switches section for wiring Program the LaserSpeed for material present “external – active high” Program the D10 module for Super High Speed output

You may have to teach the D10 light and dark levels (refer to D10 manual)

Dual through beam (uses two D10 modules)

Signal	D10	LaserSpeed
Power (+12 v to +24v)	Brown	N/A
Material Present	Black	10
Signal Ground	Blue	11

Notes:

Use with a LaserSpeed 4000-2, 8000-2, 8000-3 or 9000-3

See the Connecting Material Present Switches section for wiring Program the D10 module for Super High Speed output

Program the LaserSpeed for material present “external – active low”

You may have to teach the D10 light and dark levels (refer to D10 manual)

The distance between the switch pairs needs to be added to the length reported by the LaserSpeed

Part No. 93463 / Drawing No. 0921-01561 Page 77 of 221 Revision A (Sep 2007)