Laser LS8000-3 manual Breakout Assembly Pinouts, RS-232 Connector, RS-422 Connector

LaserSpeed 8000-3 Instruction Handbook

Interfacing with the LS8000-3

Breakout Assembly Pinouts

The pinouts for the breakout assembly connectors are listed below. Because the LaserSpeed cable connects directly to the DB25/DB37 cable, the pinout for this connector is identical to the gauge cable pinout. See the Connecting to Outputs section for details.

RS-232 Connector

This Female DB9 connector can be connected to any PC serial port using a straight-through serial cable with a male connector on one end and a female connector on the other end. A null modem is not required.

Pin	Description		DB25/DB37 Pin
2	RS-232	Transmit (from LS8000-3 to host)	1
3	RS-232	Receive (from host to LS8000-3)	2
5	Signal Ground		19

RS-422 Connector

This Male DB9 connector can be connected to an RS-422 input on a PLC, or an RS-422 converter connected to a PC. Because there is no standard pinout for RS-422, you may wish to rewire this terminal block to match your cable.

Pin	Description	DB37 Pin
1	RS422 Transmit + (from LS8000-3 to host)	26
2	RS422 Transmit – (from LS8000-3 to host)	27
3	RS422 Receive + (from host to LS8000-3)	28
4	RS422 Receive – (from host to LS8000-3)	29

Part No. 93463 / Drawing No. 0921-01561 Page 69 of 221 Revision A (Sep 2007)