Laser LS8000-3 manual RS-232 Baud Rate & Framing, Jncr

		LaserSpeed 8000-3 Instruction Handbook
		RS-232/RS-422 Communication
		RS-232 Baud Rate & Framing
J
J<CR>	Read
	Response Format: <N>
J<N><CR>	Set

<N> is an integer from 1-7, or 11 to 17 specifying the RS-232 baud rate and framing. If using binary output mode (see the TB command), the framing must be set to 8n1.

Setting	Baud Rate	Framing
1	230.4k	7n2
2	115.2k	7n2
3	57.6k	7n2
4	38.4k	7n2
5	19.2k	7n2
6	9600	7n2
7	4800	7n2
11	230.4k	8n1
12	115.2k	8n1
13	57.6k	8n1
14	38.4k	8n1
15	19.2k	8n1
16	9600	8n1
17	4800	8n1

Where:

7n1: 7 data bits, no parity, 2 stop bits

8n1: 8 data bits, no parity, 1 stop bit

Note: After this setting is changed, the COMM LED and Valid LED will flash, indicating the new configuration.

Part No. 93463 / Drawing No. 0921-01561 Page 128 of 221 Revision A (Sep 2007)