LaserSpeed 8000-3 Instruction Handbook
LaserTrak Software
Search For LaserSpeed- initiates a search for the LaserSpeed gauge to establish communication
between LaserTrak and the gauge. If the Serial checkbox is checked, the enabled serial ports will be searched. If the TCP/IP box is checked, then the local network will be searched for gauges. If no gauges are found, make sure that the serial port is enabled under Program Settings.
Program Settings- Shows the active COM Ports. Only COM Ports that are checked will be searched during the communication search. Also shows the default COM Port and operating parameters the software will use to communicate with the LaserSpeed gauge. Only the checked serial ports will be searched for LaserSpeed gauges. If a new serial port is added to the computer, it must be selected in this screen before it can be used with LaserTrak.
LaserSpeed Configuration- opens the operating parameter configuration screen. There are pages to the Configuration screen.
Part No. 93463 / Drawing No. | Page 105 of 221 | Revision A (Sep 2007) |
