South

Home Installation

observe if the signal strength increases.. For each tweak, allow a few seconds in each position to determine if the signal strength increases..

If the signal reception is good, but there is no audio, verify your audio connection..

•If you are connected to a home stereo system, be sure the system is set to the auxiliary input source, and you have connected the Stereo Audio Cable to the auxiliary input connectors..

•If you are connected to powered speakers, be sure the speakers are plugged into an outlet, and are turned On..

The audio level of your radio can also be increased.. Refer to the User Guide which accompanied your radio and increase the audio level..

If you still have questions, for example, ‘Are there any other options/things I should consider?’, etc.., refer to “Troubleshooting” on page 22..