Sirius Satellite Radio manual Contents SIR-BB3, Installation/Wiring Precautions

Page 4

Contents SIR-BB3

Users Guide

Antenna

P/N 128-7266A

(P/N 118C1129)

AC/DC Power Adapter

1 pc. (P/N 136C3585)

1 pc.

AC Power Cord

1 pc.

(P/N 112B3376)

Boom Box

 

 

(P/N SIR-BB3)

 

AUDIO OX

1 pc.

Installation/Wiring Precautions

1.If using the adapter, make sure the adapter cable is not connected to an AC wall outlet until all inter- connections have been made and verified. The adapter power cable should be connected last.

2.Incorrect installation may cause damage to the system.

3.For antenna positioning, refer to the Antenna Aiming procedure outlined in the Shuttle User Guide, SIR-PNP3 (128-7193A).

Setting Up and Installing Your Kit

NOTE: The SIRIUS® signal can be received and processed virtually anywhere as long as there are no obvious satellite signal obstructions such as high terrain, trees, overhangs, etc. However, signal reception depends mainly on where you are, geographically, and where this place is with respect to the orbital paths of the Sirius satellites. In placing the antenna, therefore, these factors must be taken into account .

-4-

128-7266A

4 of 12

Image 4
Contents Shuttle Boom BOX SIR-BB3 User Guide Congratulations FCC Regulations Installation/Wiring Precautions Contents SIR-BB3Setting Up and Installing Your Kit Boom Box SIR-BB3 Controls Battery Installation Cabling InterconnectionsInstalling/Positioning the Antenna Interconnect DiagramRemoving the Shuttle From the SIR-BB3 Antenna Placement Considerations Specifications Cleaning the SIR-BB3 Boom Box MaintenancePeriodic Inspection Troubleshooting Fault Prob AB LE Remedy CauseMonth Limited Warranty