Sirius Satellite Radio manual Maintenance, Periodic Inspection, Cleaning the SIR-BB3 Boom Box

Page 10

Maintenance

Periodic Inspection

The SIR-BB3 Boom Box should be inspected periodically for external damage. At least once every 30 days of use, perform the following checks:

1.Inspect the 20-pin Shuttle connector for loose, bent or broken pins, misalignment, etc.; make sure the SAT connector is intact and exhibits no apparent damage.

2.Check the VOL control for freedom of motion without binding of any kind.

3.Check that the MODE pushbutton operates correctly in that it toggles between the Satellite Radio output and the AUX input.

4.Make sure the antenna connector at the rear of the unit is free from damage of any kind and that the antenna lead plug mates correctly and securely.

5.Make sure the DC 12V connector at the rear of the unit is also free from damage of any kind and that the AC Adapter plug mates correctly and securely.

6.Check the antenna for any physical damage; make sure the antenna lead is secure and not nicked or frayed.

7.Inspect the overall Boom Box case and speaker grilles for damage such as nicks, scratches punctures, etc.

Cleaning the SIR-BB3 Boom Box

When cleaning the Boom Box, make sure the AC Adapter is unplugged from the power source. Do not use liquid cleaners or aerosol cleaners. Use a lint-free cloth lightly dampened with water for cleaning the exterior of the Boom Box only.

-10-

128-7266A

10 of 12

Image 10
Contents Shuttle Boom BOX SIR-BB3 User Guide Congratulations FCC Regulations Installation/Wiring Precautions Contents SIR-BB3Setting Up and Installing Your Kit Boom Box SIR-BB3 Controls Battery Installation Cabling InterconnectionsInstalling/Positioning the Antenna Interconnect DiagramRemoving the Shuttle From the SIR-BB3 Antenna Placement Considerations Specifications Cleaning the SIR-BB3 Boom Box MaintenancePeriodic Inspection Troubleshooting Fault Prob AB LE Remedy CauseMonth Limited Warranty