2.After making sure the connectors are properly lined up, gently press down on the shuttle to mate the connectors together. The shuttle should now be nestled securely in the Boom Box compartment. Lower the PNP cover into position over the Shuttle; This will prevent accidental Shuttle disconnect. Apply power to the
4.Removing the Shuttle From the SIR-BB3
Press the EJECT button on top of the Boom Box to raise the cover. Gently grasp the Shuttle from the top and pull straight up to disengage.
5.Installing/Positioning the Antenna
For best reception, the supplied antenna should be placed near a window if in the house or, if outdoors, in an open area and as high as possible; some repositioning may be required to achieve optimum results. The following guidelines are recommended:
Interconnect Diagram | ANTENNA | |
SHUTTLE | ||
STORAGE | ||
BOOM BOX | ||
SHELF | ||
DCPOWER | ||
ANTENNA | ||
ADAPTER | ||
JACK (ANT) | JACK |
DCPOWER
ADAPTER (DC 12V 2.2A)
SHUTTLE | TO AC WALL |
ANTENNA | OUTLET |
a.In a major city, where Sirius ground repeaters are present, you can usually place the antenna away from a window and still achieve the desired results.
b.You can also place the antenna outside (on the roof structure), provided it is clear of any overhead obstructions. Because of the orbiting characteristics of the Sirius Satellites, the strength of the received signal may change over
7 of 12