Demco AB20001 owner manual Left Inner Wing Parts Breakdown, Part QTY Description

LEFT INNER WING PARTS BREAKDOWN

							8
							9
				15		6	7
	25		21
		19
	24		22 20			9
			26				1
28	27			12	10	7
				9
			26	8	7	5
					11
			23	17		4
					13
				2
				29	16
					29
				19		16
				18
	14					3
				29	17
				16

31

	33		32
		30
	27	27	33
	NOTE: To attach the gusset
35	36	plate (#36) follow step
	34	7 on page 7.

ASSEMBLY INSTRUCTIONS

1.Attach the upper offset linkage (#6) to center section (#1) using one 1/2" x 2" bolt (#7), bushing (#8) and one 1/2" locknut (#9).

2.Next attach the lower linkage bracket (#10) to the upper offset linkage (#6) using one 1/2" x 2" bolts (#7) and one 1/2" locknut (#9).

3.Mount the left center hinge (#2) to the center section (#1). Secure with pin (#3), 3/4" machine washer (#16), 3/8" x 3/4" setscrew (#5) and 3/8" jam nut (#4).

4.Bolt the linkage mounting plate (#11) to the left center hinge (#2) as shown using two 3/8" x 2-1/2" U-bolts (#12) and four 3/8" locknuts (#13). Bolt the lower linkage bracket (#10) to the linkage mounting plate (#11) using one 1/2" x 2" bolt (#7), bushing (#8), and one 1/2" locknut (#9).

5.Attach the left inner wing (#14) to the left center hinge (#2) with the 3/4" machine washer (#16) between the wing and hinge, using the center hinge pin (#15). Secure with two 5/16" x 1/2" setscrews (#17).

6.Insert the 1/2" x 1-1/2" bolt (#18) and 1/2" nut (#19) into the center hinge (#2) as shown above.

7.Assemble the wing latch handle (#20) to the center hinge (#2) using the 7/16" clevis pin (#21), 3/8" flatwasher (#22) and secure with 5/32" x 1" cotter pin (#23). Next attach the wing latch channel (#24) to the wing latch handle (#20) using one 5/16" x 2-1/2" bolt (#25), two 5/16" flatwashers (#26), and one 5/16" locknut (#27). Next screw the tee bolt (#28) into the wing latch channel (#24) and secure with 1/2" jam nut (#19) on back side.

8.Bolt the wing storage bracket (#30) to the left wing approximately 23" from latch plate on the left wing, using two 5/16" x 2" sq. U-bolt (#35) and four 5/16" locknuts (#27).

			PARTS LIST
REF.	PART
NO.	NO.	QTY.	DESCRIPTION
1.	03314	1	Center Section
2.	03315	1	Left Hinge
3.	03319	1	Center Hinge Pin
4.	04886	1	3/8"-16UNC Jam Nut
5.	00095	1	3/8"-16UNC x 3/4" Square Head Setscrew
6.	00171	1	Upper Offset Linkage Bracket
7.	01253	3	1/2"-13UNC x 2" Hex Head Bolt Gr.5
8.	02491	2	Bushing (3/4" O.D. x 1/2" I.D. x 1/2" lg.)
9.	02178	3	1/2"-13UNC Nylon Insert Locknut
10.	00170	1	Lower Linkage Bracket
11.	03318	1	Linkage Mounting Plate
12.	05294	2	3/8"-16UNC x 2-1/8" Square U-bolt
13.	02592	4	3/8"-16UNC Nylon Insert Locknut
14.	03322	1	Left Inner Wing
15.	03321	1	Inner Hinge Pin (3/4" x 20")
16.	02534	3	3/4" x 14 Ga. Machine Washer
17.	00091	2	5/16"-18UNC x 1/2" Square Head Set Screw
18.	01254	1	1/2"-13UNC x 1-1/2" Hex Head Bolt Gr.5
19.	00640	2	1/2"-13UNC Jam Nut
20.	05309	1	Wing Latch Handle
21.	00080	1	7/16" x 1-1/4" lg. Clevis Pin
22.	00059	1	3/8" Flatwasher
23.	00185	1	5/32" x 1" lg. Cotter Pin
24.	05310	1	Wing Latch Channel
25.	04221	1	5/16"-18UNC x 2-1/2" Hex Head Bolt Gr.5
26.	00004	2	5/16" Flatwasher
27.	02802	3	5/16"-18UNC Nylon Insert Locknut
28.	03320	1	Latch Bolt
29.	04642	4	Zerk
30.	03335	1	Storage Bracket
31.	04822	3	1/4"-20UNC x 1-1/16" Square U-bolt
32.	00199	1	3/8" Dia. x 3-1/2" lg. Lock Pin
33.	00182	1	1/8" Small Hair Pin
34.	02772	6	1/4"-20UNC Nylon Insert Locknut
35.	00909	1	5/16"-18UNC x 1-1/4" Square U-bolt
36.	03537	1	Gusset Plate

Please order replacement parts by PART NO. and DESCRIPTION.

Page 5